Skip to main content

Three Cs Part Two - Centre of Pressure and Centre of Force

Two very important concepts to understand in biomechanics are Centre of Pressure and Centre of Force.
These are often used interchangeably but are actually different, mostly though, by convention, it is CoP that is used when considering how normal forces act over an area. Normal force means that force perpendicular to the surface of interest. When 2 objects act on each other with force then there will always be an interface that has some area and the forces acting over that area are called pressure. Pressure if Force divided by area and the unit of pressure is the Pascal, however 1 pascal is very small at 1N/m^2 or 100grams spread over 1million sq millimeters = 0.00001 grams / mm^2. So it is common to use kilopascals (1000 pascals) or KPa as the standard unit of pressure.
Go here for a PPT presentation on CoF Vs CoP

Comments

  1. I like this article. I was searching on the search engine and found your blog. I get more knowledge and I read a lot of interesting content here. keep doing it. Podiatrist Bakersfield CA

    ReplyDelete
    Replies
    1. Glad it helped you CVVS - thanks for th efeedback

      Delete
  2. This is actually good to read content of this blog. A is very general and huge knowledgeable platform has been known by this blog. I in reality appreciate this blog to have such kind of educational knowledge.
    bestmelbourne

    ReplyDelete
  3. Good knowledge, You have provided valuable and important data for us. It Podiatrist Bakersfield CA is good and informative for everyone. Keep posting always. I am very thankful to you. Thanks once again for sharing it.

    ReplyDelete
  4. Thanks for publishing such great knowledge. You are doing such a great job. This infoof Pediatric Surgeon in Bakersfield CA is very helpful for everyone. Keep it up. Thanks once again for sharing it.

    ReplyDelete
  5. You've written a very useful article. This article provided me with some useful knowledge. Thank you for providing this information. Keep up the good work. IDOL MAX

    ReplyDelete
  6. I generally check this kind of article and I found your article which is related to my interest.Halifax cannabis delivery Genuinely it is good and instructive information. Thankful to you for sharing an article like this.

    ReplyDelete

Post a Comment

Popular posts from this blog

Torque Moments Levers

Torque, Moments, Axis and Levers - now this is the meat of podiatric biomechanics. Torque and moment are used to describe rotational force, i.e. force applied to a lever about some axis of rotation. Moment is the more usual term in biomechanics and moments of force are in the units of Newton.meters Nm. Why? because Newton is the basic unit of force and metre is the measure of the length of the lever. So the unit of mass is kilogram and gravity (on earth) acting on 1kg is equal to 9.87Newtons, why? Because as we've seen before the acceleration of gravity is 9.87m/s^2 and if you remember Force = Mass x Acceleration (f=ma) Example: a lever 500mm long with a force applied of 250N results in a moment of 125Nm Simple enough of course. There are classically 3 types of lever, 1) force-fulcrum-load, 2) Force-load-fulcrum 3) Load-force fulcrum and they can all be seen in the body (https://www.slideshare.net/spanglerscience/muscle-leversppt-presentation  Although a lever is a ...
Presentation on analysis and interpretation of characterisation of pressure mat data This is an embedded Microsoft Office presentation, powered by Office Online . or go here   pressure mat systems